Fuel Cells

The Racell fuel cells from ATL are compact and have a relatively small capacity making them ideal for sprints / hillclimbs, short circuit racing, etc.
Supplied with baffle foam fitted and a flush fit filler cap.

There are 2 inlets and 1 return in -8 JIC and a -6 JIC rollover vent valve.

A range of fuel cells from ATL which are 'D' shaped, making them ideal for fitting into a spare wheel well.
Manufactured from a unique ATL565 material. Each one is supplied fully foam baffled to help reduce fuel slosh and suppress explosions.
All the saver cell are fitted with a 6” x 10” top plate which includes the following fittings-

2 x -6 JIC fuel pickups with filters
1 x -6 JIC rollover vent valve
2 1/4” Diameter non return filler neck with integral valve.

Cells are also available with an internal collector for use with fuel injection systems. These cells also are available with an optional rear plate with one 1 x -6 JIC outlet and 1 x -6 JIC Inlet

Constructed from a unique, tough plastic alloy ATL565
Length x Depth x Height: 566 x 566 x 244mm (+ top plate 14 mm)
Homologation FIA/FT3-1999

Please note that all Saver Cells experience some swelling when subjected to fuel (typically 2-4% linear).

Please allow up to 2 weeks for Saver Cell bladder dimensions to stabilise.

Supplied with:
(1) 6 x 10" Standard Saver Top Plate (only SA-AA-220)
(2)  -6 'Duck-Foot' fuel pick-ups (with sock filters)
Internal Safety Foam Baffling

Available with or without top plate.

The ATL Saver fuel cell range is manufactured from a unique ATL565 material. Each one is supplied fully foam baffled to help reduce fuel slosh and suppress explosions.
All  6” x 10” top plate includes the following fittings:
1 x -6 JIC fuel pickups
1 x -6 JIC fuel return
1 x -6 JIC rollover vent valve
1 x  2 1/4” Diameter filler neck with safety valve and cap.
 

The 20 Litre version part number SA-AA-030 fitted with a 4” x 6” top plate has:
1 x -6 JIC fuel pick up and filter
1 x -6 JIC rollover vent
1 x  2 1/4” Diameter filler neck with 

FIA Specification: FIA FT3-1999 approved.
IMPORTANT: if the tank is mounted inside the cockpit, it must be fitted with a container (can be purchased separately)

Constructed from a unique, tough plastic alloy ATL565
Homologation FIA/FT3-1999

Supplied with:
- (1) 6x10" Standard Saver Cell Top Plate
- (2) -6 'Duck-Foot' fuel pick-ups (with sock filters)
- (1) -6 Rollover Vent Valve
- Internal Safety Foam Baffling

Aluminium Container available separately

These aluminum alloy containers are designed to protect the tank.
They are custom made for each Saver Cell ATL model and feature a removable lid that has a cutout for access to the top. In case of assembly inside the passenger compartment, the customer must provide an additional watertight cover for the flange and the filler neck (part not supplied).